Moldboard Brace for International Moldboard Plows with Plow Chief Bottoms, 519361R1 The original rawhide seals may

The original rawhide seals may be thicker in width than the replacement

Splines on connector are in good condition

Cultivator sweeps are 1-1/2" inches wide and 8" inches in length

THEN LAY A STRAIGHTEDGE ACROSS WHEEL (RIM) AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE

Case IH Operators Platform Floor Board part numbers: 48699DBX

Moldboard Brace for International Moldboard Plows with Plow Chief Bottoms, 519361R1 The original rawhide seals mayMoldboard Brace for IH International Moldboard Plows with Plow Chief (PC) Bottoms. Total length of brace is 12" inch. Case IH Plow Chief Moldboard Brace part numbers 519361R1. Used on Plow Chief (PC) 12", 14", 16" Bottoms with Replaceable Shins. These Plow Chief (PC) Bottoms are found on IH Plows commonly built from 1954 to 1970. Please compare images to original part or contact us for additional details, photos, or measurements.